3D Forums

Trumpeter Jagdtiger...
 
Share:
Notifications
Clear all

Trumpeter Jagdtiger 1/16 scale (completed)

Page 2 / 2

 Ron
(@ron)
Reputable Member Admin Registered
Joined: 6 years ago
Posts: 211
Topic starter  

Today I've finished the build as far as building, next is the touch up painting and clean up before the gloss coat. After the gloss coat degases then the decals will go on.

Then the dull coat...  then the

fun starts with weathering and details

20200609 111252
20200609 111119
20200609 111338

 

20200609 111353
20200609 111430
20200609 111419
20200609 111128
20200609 114800

 

I did set it in front on my monitor and this jagdtiger makes it look small, also the shell of the panther next to the jagd and some pictures before the cables.

20200603 081343
20200604 143854
20200604 143904
20200603 080843
20200603 080216

   
Harold Adams reacted
ReplyQuote
 Ron
(@ron)
Reputable Member Admin Registered
Joined: 6 years ago
Posts: 211
Topic starter  

For the cable brackets I'm going with red primer and after a few more little things it will be time for the gloss coat. hmmm I think I'd better check my stock first lol

20200610 174105
20200610 174130

   
Harold Adams reacted
ReplyQuote
 Ron
(@ron)
Reputable Member Admin Registered
Joined: 6 years ago
Posts: 211
Topic starter  

Well the gloss coat went down nicely with only one mishap and it was the travel gun lock.
The pin that holes the latch in place snapped in 2, it's fixed now and the decals are on.
Soon it will be time for dull coat then weathering. For fun I put 1/35 scale figure on the tank.

20200612 081515
20200612 081400
20200611 190708
20200611 190722
20200611 190743
20200613 125357
20200613 125348

   
Harold Adams reacted
ReplyQuote
Harold Adams
(@harold-adams)
Member
Joined: 5 years ago
Posts: 93
 

Wow! This is one helluva modelling endeavor to take on. Looking at those photos of the progress you've made is quite amazing! Beautiful painting and detailing! Well done! Can't wait to see the finished vehicle!!👍👍👍


   
ReplyQuote
 Ron
(@ron)
Reputable Member Admin Registered
Joined: 6 years ago
Posts: 211
Topic starter  

It was completed and placed in the gallery

Also a blog post 
https://coldthunder.com/index.php/2020/06/15/jagdtiger-1-16-scale-finally-completed/

and post on the progress
https://coldthunder.com/index.php/2020/03/12/work-in-progress-on-the-jagdtiger-1-16-scale/

 


   
Harold Adams reacted
ReplyQuote
Harold Adams
(@harold-adams)
Member
Joined: 5 years ago
Posts: 93
 

Woohoo!!😀

That is sweet! Nice build! Very impressive. And 1/16th!!

I followed this build, and painting. Lots of intricate details. How was the overall fit of the kit?

 


   
ReplyQuote
 Ron
(@ron)
Reputable Member Admin Registered
Joined: 6 years ago
Posts: 211
Topic starter  

@harold-adams
Overall it was a fun build but there were some fitting issues that were a pain in the ass at times, but nothing making it a show stopper. Some of the pipes were almost impossible to install then to find out none of it was to be seen. Oh well I know it's done just like the engine (only the top can be seen). 

So that's why I'm glad it all can be seen on here. 


   
Harold Adams reacted
ReplyQuote
Page 2 / 2
Share:

Home

Comments are closed.