Both tables started as gray plastic as shown below.

Using rough grit sanding sticks and a ultra fine and extra fine razor saw to deepen and brink out the wood grain, next primer black is sprayed... hard to tell in the photo but they are black.

Then a light spray of AK wood base or any color you feel will give you the wood base color you need. Then brushed on AK worn effects on one of the tables.

Next sprayed Tamiya XF-65 on both tables.

Next the table that had worn effects, I used a stiff brush and water and on the table with nothing added I lightly sanded to scratch up the top coat.

Last step is washes (both enamels and oils) a long with some pigments